July 4, 2011I was wondering, I have a 04 Kingranch f250 and want a 8in lift kit for it. with the superlift kit does the drive shaft angles front and rear need to be altered at all. I had a 95 bronco with the superlift 6in with 3in body and I didnt. was just wandering thanks
Forums : Suspension : ?? for BIGGREEN (1126 Views)
Subscribers : f25060
July 4, 2011Not sure you will get an answer from him, he has not been around for many moons!
2012 - THE END OF AN ERROR! Democracy... is two wolves and a lamb voting on what to have for lunch. Liberty ... is a well-armed lamb contesting the vote. -- Benjamin Franklin
July 4, 2011you may want to look into DR/icon ( Donahoe Racing ) lift kits for the super duty.
they have a much better line of parts and accessories for your truck and have all the angles figured out better in the kit
July 15, 2011Jesse`s been out for a while.
As for the 8" kit, it depends on the manufacture, with that much I would assume at least the front d/s will need to be lengthened. I would definitely check the angles of the d/s`s after the install and make them right. Adjusting the angles is pretty easy, most manufactures will include some taper in their lift blocks or shims for the rear, and shims for the front to get your shafts pointing the right way. Call Superlift and ask them, they should have a disclaimer in their parts book about recommended d/s upgrades.