March 20, 2011well yesterday I started to change out my rear sub box from my explorer. it takes up so much room that there is not alot of storage room.
here is what it looked like.
and I had a set of speakers that I picked up two years ago that I`ve wanted to put in, but didn`t have the metal to do it with.
so first I made the brackets that are going to hold the speakers.
then after figuring out the distance between the brackets I made a cross brace.
now it was time to have a test fit and figure out mounting spot for the new brackets.
everything looked good so far! well..... so I rolled the carpet out and cut it around the brackets. got all that figured out and in place. and it don`t look bad! I have an office chair mat that I cut down that will go over the carpet to keep it from getting wet when you throw wet stuff back there that still has to be cut and installed again.
so here are the speakers!
and they rotate too!
now I just have a few things to do.
have to rewire the speakers
have to relocate my cigarette lighter to the back of the truck for power.
need to get some roll bar foam or something like it to cover the tubing and wiring