April 30, 2011
just put a set of aftermarket guages in my 92 f150 and my check engine light is on. i know its from unplugging my oil pressure and my water temp what can i do to get the light to go off ?Forums : Underhood : need a little assistance (1291 Views)
![]() |
![]() |
1 | ![]() |
![]() |
I got 2 F150s I pass Chevys and Dodges Sideways and tires smokin !!!!!
April 30, 2011
put a T fitting in the oil line so both are hooked upwater should not matter
Current trucks>
73 F350 4x4 5.8 twin turbo,5sp,dana60/80 disc brake
02 F450 PSD crew flatbed dump
May 4, 2011
ReedRepower thanks for the help on the guages i td the oil press and the light went offfor about 20 sec so im thinkin i gotta do the same for the water too, also like your pics i had a 79 f 250 with a 429 stump puller in it it had 7 inces of lift and 40s dana 60s front and rear . miss that truck !!and thanks again for your help im still tryin to get some pic of my trucks on hereI got 2 F150s I pass Chevys and Dodges Sideways and tires smokin !!!!!
May 5, 2011
you may have codes in the system that need to be cleared.thanks for the complement,I started ReedRepower for all my freinds that drove 79 and down ford trucks.We put late model drive trains in older pickups.
the green pickup in my avatar has 5.8w twin turbo EFI w/zf 5sp,dana 60`s
Current trucks>
73 F350 4x4 5.8 twin turbo,5sp,dana60/80 disc brake
02 F450 PSD crew flatbed dump
![]() |
![]() |
1 | ![]() |
![]() |