April 23, 2010

My first choice. My truck needs a lot of body work but I wanna cruise this Summer and I`m going fix it right this winter. It`s a simple 3 part mix, the resin and hardner and the matt. You mix the resin and hardner and lay down a coat, that`s the glue. Then lay down a coat of fiberglass matt, then another coat of hardened resin. Then you need a roller to roll out any air pockets. Repeat for 2 or 3 coats. You might notice some heat coming off your project from the chemical reaction from the hardner and the resin. Quit smilin dude, there`s some hard work comin atcha. Use a cheese grater to knock it down, blow it off, clean it properly and use body filler to finish.