January 10, 2009I just had a body installed and forgot to have move the wire harness moved above the frame rail. How hard is it to move now?
January 10, 2009shouldn''t be that hard to move. what truck did you have a body lift put on?? you may not have to move the whole harness. might just have to remount some of it to get some slack where needed.
January 10, 2009Hey Lounge Lizard, my truck is a 02'' f150 4x4 excab, the problem is one of the driver side lift blocks is in the way of me just moving it up.
January 10, 2009well now that the complete lift is in place you should be able to loosen that one block up and move it long enough to move the harness out of the way.
mind you! you may have to do some temporary blocking with a 2"x4" just long enough to move the harness and put the block back in and tighten it back up. shouldn''t be that hard to do.
oh! and welcome to the site!
September 1, 2009Is the harnessunderneath and on the outside of the lift block/body lift? if thats the case you can either do what lizard said or you can just unplug one end of the harnesss and re route it where it needs to go. i wish i couldnt tell you this from experience but...