December 25, 2008im thinking about putting an eaton m90 supercharger on the old i6. im wondering if any1 has suggestions about what i could do to make it operate better with the computer. ive looked into bigger injectors and higher octane fuel, would this be enough to get alot of power *or* would i need to get a piggyback computer? I only want to run about 8-10 psi so i dont have to change any internal parts on the motor. plus i need to figure a way to mount and pipe it to work with the intake manifold of the I6. is this setup possible? any input would be great.thanks
Subscribers : Joe55
December 25, 2008you can mount them anyway you want. you may have to convert you truck into Mass air for it to properly run right.
December 25, 2008And with the 300, since they only used Mass Air on those engines, the final year, 1996... its not so Easy, like one of the v8s.. I think youd be better off with a Turbo,
March 2, 2009What trans are you running? If you have a computer controlled trans it might be alittle harder to use the blower. If you are running a C-6 *or* manual it will be much easier.